7×14 Hydraulic Dump Trailer 3ft Sides 2-7k Axles GVWR 14K

A 7×14 dump trailer, reduced to $9,199 from $10,999. It runs on two 7,000lb axles, 14,000lb of axle capacity between them. The listing states a 14,000lb GVWR.

It is a 7×14, giving about 98 sq ft of deck. Specification includes a hydraulic dump body and 3ft sides.

That price puts it at the lower end of the Dump Trailers we stock. Ask for stock PL-6696 when you call and we will confirm condition and offloading access before you order.

Listed specification

• The length of the trailer is 14 feet, or 168 inches.
• The sidewall height measures 36 inches, providing sufficient vertical space for various loads.
• The width of the trailer is 7 feet, or 82
• The floor height is set at 29 inches above the ground for easy loading and unloading
• The cross members are made from 2″ x 3″ tubes, spaced 16 inches on center for enhanced structural integrity.
• The wheels feature a black powder coat finish, providing durability and protection against corrosion.
• The coupler is a 2-5/16″ adjustable coupler, allowing for flexible towing options
• The tires are 16-inch radial tires designed for reliable performance on various terrains.
• The power unit consists of a 12v DC hydraulic pump that provides 3200 PSI for lifting and 1500 PSI for lowering.
• The spare tire mount is a standard mount, facilitating easy access to a spare tire when needed.
• The battery is an Interstate deep cycle marine battery, ensuring a dependable power supply for the trailer’s hydraulic system.
• The ramps are 80-inch C-channel fender-mounted ramps, providing convenient access for loading and unloading.
• The jack is an adjustable 7000 lb. top wind drop leg jack, offering stability and ease of use during loading and unloading.
• The lighting system features amber and red LED lights for enhanced visibility and safety on the road.
• The control box has easy front access with a key lock for added security and convenience.
• The electric plug is a 7-pin round connector, ensuring a reliable electrical connection between the trailer and towing vehicle.
• The stake pockets are made from 2″ x 4″ tubes, providing additional structural support and tie-down options for securing loads.
• The gussets are 2″ x 12″ in dimension, located at the front and rear for wall extension support and structural reinforcement.
• The floor and walls are made from 10-gauge smooth steel, ensuring maximum durability and strength for heavy loads.
• The integrated tarp system features fully covered housing to protect loads from the elements during transport.
• The D-rings are five 5000 lb. D-rings welded into the floor, providing secure tie-down points for various loads.
• The style of the trailer is low-profile, which enhances handling and aerodynamics during towing.